Control systems

The RT50 control system ensures an optimal configuration for practically every application. The RT60 control system and the RT32 controller are a simple and cost-effective solution for a wide variety of applications.
All of our controllers are designed to avoid problems before they arise.

Automated manufacturing processes require data transfer between the temperature control unit and the production facility's central computer. This is just one of many applications for the RT50 and RT60 control systems with a data interface.

Our control systems at a glance:

	RT32	RT50	RT61
Seven-line clear-text LCD display. Choice of languages
Simultaneous readout of temperature set-point and actual values
Choice of temperature display (decimal place)
Temperature limit values (+/–) adjustable
Fluid temperature control
Control of the consumer temperature with cascade control for highest temperature constancy with 2 control circuits (consumer and fluid)
Set-point switch-over (value 1/value 2)
External sensor connection for Pt100, J (Fe-CuNi), K (NiCr-Ni) or T (Cu-CuNi)
Leak-stop operation
Drainage of the fluid from the consumer by suction
Drainage of the fluid from the consumer by compressed air
Time switch
Flow rate measurement from 2 to 200 l/min for water and oil up to 350 °C
Inlet sensor (Pt100)
External control: set-point switchover, heating/cooling command
External control: set-point input, switching the unit on/off
Data interfaces
Scalable recorder outputs
All disturbances in the unit are indicated on the display
Set-point “blockable” as protection against incorrect adjustment
Limitation of max. programmable set-point
Monitoring of upper and lower limit values
Unauthorized access to the programming levels prevented by a code
Automatic pump rotation correction
Sensor-failure monitoring
Automatic switch-over to the internal sensor (fluid) in the event of external sensor failure
Units with automatic water refilling: In order to limit the consequences of leakage (i.e. hose burst) the filling time per refill and the number of refills per hour is limited for the purposes of protecting the production installation against damage caused by water
Common accoustic alarm (150 option)
Indication of the service interval
Operating hours meter
Programmed data remains stored during replacement of electronic components

 Standard Option Not available Device-related