Tables de températures

Tables de températures


Chercher dans  
après   

Zoltek Rt, H-2537 Nyergesujfalu

Danamid AFCF 20
(1) PA 66, medium viscosity injection moulding type, reinforced with 20 % carbon fibres, antistatic, electrically conductive (2) 270-290 °C (3) 80-100 °C (5) < 0.2 % (6) 75-80 °C (7) 2-4 h (8) x

Danamid AFCP 40
(1) PA 66, medium viscosity injection moulding type, reinforced with 40 % milled carbon fibres, antistatic, electrically conductive (2) 270-290 °C (3) 80-100 °C (5) < 0.2 % (6) 75-80 °C (7) 2-4 h (8) x

Danamid AFE
(1) PA 66, medium viscosity injection moulding type, good flowability, standard (2) 260-280 °C (3) 70-100 °C (5) < 0.2 % (6) 75-80 °C (7) 2-4 h (8) x

Danamid AFES
(1) PA 66, medium viscosity injection moulding type, dry impact resistant (2) 260-280 °C (3) 70-100 °C (5) < 0.2 % (6) 75-80 °C (7) 2-4 h (8) x

Danamid AFES 21
(1) PA 66, medium viscosity injection moulding type, dry impact resistant (2) 260-280 °C (3) 70-100 °C (5) < 0.2 % (6) 75-80 °C (7) 2-4 h (8) x

Danamid AFES 23
(1) PA 66, medium viscosity injection moulding type, dry- and cold impact resistant (2) 260-280 °C (3) 70-100 °C (5) < 0.2 % (6) 75-80 °C (7) 2-4 h (8) x

Danamid AFGF
(1) PA 66, medium viscosity injection moulding type, 30 % glass fibres (2) 270-290 °C (3) 80-100 °C (5) < 0.2 % (6) 75-80 °C (7) 2-4 h (8) x

Danamid FCP
(1) PA 6, medium viscosity injection moulding type, reinforced with 40 % milled carbon fibres, antistatic, electrically conductive (2) 250-270 °C (3) 80-100 °C (5) < 0.2 % (6) 75-80 °C (7) 2-4 h (8) x

Danamid FE
(1) PA 6, medium viscosity injection moulding type, easy flow (2) 240-270 °C (3) 60-100 °C (5) < 0.2 % (6) 75-80 °C (7) 2-4 h (8) x

Danamid FEH
(1) PA 6, medium viscosity injection moulding type, heat stabilized (use up to 120-130 °C) (2) 240-270 °C (3) 60-100 °C (5) < 0.2 % (6) 75-80 °C (7) 2-4 h (8) x